change reconfigure pin for nicla vision

Author: fabik111

examples/NetworkConfiguratorDemo/NetworkConfiguratorDemo.ino

@@ -21,6 +21,7 @@
  * - Arduino MKR WiFi 1010: short the pin 7 to GND until the led turns off
  * - Arduino GIGA R1 WiFi: short the pin 7 to GND until the led turns off
  * - Arduino Nano RP2040 Connect: short the pin 2 to 3.3V until the led turns off
+ * - Nicla Vision: short the pin PA_13 to GND until the led turns off
  * - Portenta H7: short the pin 0 to GND until the led turns off
  * - Portenta C33: short the pin 0 to GND until the led turns off
  * - Portenta Machine Control: the reset is not available

src/ANetworkConfigurator_Config.h

@@ -97,7 +97,7 @@
 
 #if defined(ARDUINO_NICLA_VISION)
   #define NETWORK_CONFIGURATOR_COMPATIBLE 1
-  #define PIN_RECONFIGURE 2
+  #define PIN_RECONFIGURE 39 // PA_13
   #define LED_RECONFIGURE LED_BUILTIN
   #define BOARD_HAS_RGB
   #define GREEN_LED LEDG

src/Arduino_NetworkConfigurator.cpp

@@ -111,6 +111,7 @@ NetworkConfiguratorStates NetworkConfiguratorClass::update() {
    * - Arduino MKR WiFi 1010: short the pin 7 to GND until the led turns off
    * - Arduino GIGA R1 WiFi: short the pin 7 to GND until the led turns off
    * - Arduino Nano RP2040 Connect: short the pin 2 to 3.3V until the led turns off
+   * - Nicla Vision: short the pin PA_13 to GND until the led turns off
    * - Portenta H7: short the pin 0 to GND until the led turns off
    * - Portenta C33: short the pin 0 to GND until the led turns off
    * - Portenta Machine Control: the reset is not available

src/Arduino_NetworkConfigurator.h

@@ -58,6 +58,7 @@ enum class NetworkConfiguratorStates { ZERO_TOUCH_CONFIG,
  * - Arduino MKR WiFi 1010: short the pin 7 to GND until the led turns off
  * - Arduino GIGA R1 WiFi: short the pin 7 to GND until the led turns off
  * - Arduino Nano RP2040 Connect: short the pin 2 to 3.3V until the led turns off
+ * - Nicla Vision: short the pin PA_13 to GND until the led turns off
  * - Portenta H7: short the pin 0 to GND until the led turns off
  * - Portenta C33: short the pin 0 to GND until the led turns off
  * - Portenta Machine Control: the reset is not available