Merge branch 'release/v3.2.x' of https://github.com/espressif/arduino-esp32 into idf-release/v5.4

Author: me-no-dev

cores/esp32/Arduino.h

@@ -33,14 +33,17 @@
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
 #include "freertos/semphr.h"
-#include "esp32-hal.h"
 #include "esp8266-compat.h"
 #include "soc/gpio_reg.h"
 
 #include "stdlib_noniso.h"
 #include "binary.h"
 #include "extra_attr.h"
 
+#include "pins_arduino.h"
+#include "io_pin_remap.h"
+#include "esp32-hal.h"
+
 #define PI         3.1415926535897932384626433832795
 #define HALF_PI    1.5707963267948966192313216916398
 #define TWO_PI     6.283185307179586476925286766559
@@ -248,8 +251,4 @@ void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0);
 void noTone(uint8_t _pin);
 
 #endif /* __cplusplus */
-
-#include "pins_arduino.h"
-#include "io_pin_remap.h"
-
 #endif /* _ESP32_CORE_ARDUINO_H_ */

cores/esp32/FirmwareMSC.cpp

@@ -19,8 +19,8 @@
 #include "esp_partition.h"
 #include "esp_ota_ops.h"
 #include "esp_image_format.h"
-#include "esp32-hal.h"
 #include "pins_arduino.h"
+#include "esp32-hal.h"
 #include "firmware_msc_fat.h"
 #include "spi_flash_mmap.h"
 

cores/esp32/esp32-hal-gpio.h

@@ -24,9 +24,9 @@
 extern "C" {
 #endif
 
+#include "pins_arduino.h"
 #include "esp32-hal.h"
 #include "soc/soc_caps.h"
-#include "pins_arduino.h"
 #include "driver/gpio.h"
 
 #if (CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3)

libraries/Matter/examples/MatterMinimum/MatterMinimum.ino

@@ -55,6 +55,8 @@ bool onOffLightCallback(bool state) {
 }
 
 void setup() {
+  Serial.begin(115200);
+
   // Initialize the USER BUTTON (Boot button) that will be used to decommission the Matter Node
   pinMode(buttonPin, INPUT_PULLUP);
   // Initialize the LED GPIO
@@ -63,9 +65,14 @@ void setup() {
   // Manually connect to WiFi
   WiFi.begin(ssid, password);
   // Wait for connection
+  Serial.println();
+  Serial.print("Connecting to ");
+  Serial.println(ssid);
   while (WiFi.status() != WL_CONNECTED) {
+    Serial.print('.');
     delay(500);
   }
+  Serial.println();
 
   // Initialize at least one Matter EndPoint
   OnOffLight.begin();
@@ -77,11 +84,11 @@ void setup() {
   Matter.begin();
 
   if (!Matter.isDeviceCommissioned()) {
-    log_i("Matter Node is not commissioned yet.");
-    log_i("Initiate the device discovery in your Matter environment.");
-    log_i("Commission it to your Matter hub with the manual pairing code or QR code");
-    log_i("Manual pairing code: %s\r\n", Matter.getManualPairingCode().c_str());
-    log_i("QR code URL: %s\r\n", Matter.getOnboardingQRCodeUrl().c_str());
+    Serial.println("Matter Node is not commissioned yet.");
+    Serial.println("Initiate the device discovery in your Matter environment.");
+    Serial.println("Commission it to your Matter hub with the manual pairing code or QR code");
+    Serial.printf("Manual pairing code: %s\r\n", Matter.getManualPairingCode().c_str());
+    Serial.printf("QR code URL: %s\r\n", Matter.getOnboardingQRCodeUrl().c_str());
   }
 }