Added IntegerEasyTransfer examples

Author: j54n1n

avr/libraries/IntegerEasyTransfer/examples/IntegerEasyTransfer_RX_Example/IntegerEasyTransfer_RX_Example.ino

@@ -0,0 +1,45 @@
+#include <IntegerEasyTransfer.h>
+
+//create object
+IntegerEasyTransfer ET;
+
+struct RECEIVE_DATA_STRUCTURE {
+	//put your variable definitions here for the data you want to receive
+	//THIS MUST BE EXACTLY THE SAME ON THE OTHER ARDUINO
+	int16_t blinks;
+	int16_t pause;
+};
+
+//give a name to the group of data
+RECEIVE_DATA_STRUCTURE mydata;
+
+void setup() {
+	Serial.begin(9600);
+	//start the library, pass in the name of the serial port. Can be Serial,
+	//Serial1, Serial2, etc. 
+	ET.begin(&Serial);
+	
+	pinMode(13, OUTPUT);
+
+}
+
+void loop() {
+	//check and see if a data packet has come in.
+	if (ET.receiveData()) {
+		//this is how you access the variables.
+		//[name of the group].[variable name]
+		mydata.blinks = ET.readInt();
+		mydata.pause = ET.readInt();
+		//since we have data, we will blink it out. 
+		for (int i = mydata.blinks; i > 0; i--) {
+			digitalWrite(13, HIGH);
+			delay(mydata.pause * 100);
+			digitalWrite(13, LOW);
+			delay(mydata.pause * 100);
+		}
+	}
+	
+	//you should make this delay shorter then your transmit delay or else
+	//messages could be lost
+	delay(250);
+}

avr/libraries/IntegerEasyTransfer/examples/IntegerEasyTransfer_TX_Example/IntegerEasyTransfer_TX_Example.ino

@@ -0,0 +1,46 @@
+#include <IntegerEasyTransfer.h>
+
+//create object
+IntegerEasyTransfer ET;
+
+struct SEND_DATA_STRUCTURE {
+	//put your variable definitions here for the data you want to send
+	//THIS MUST BE EXACTLY THE SAME ON THE OTHER ARDUINO
+	int16_t blinks;
+	int16_t pause;
+};
+
+//give a name to the group of data
+SEND_DATA_STRUCTURE mydata;
+
+void setup() {
+	Serial.begin(9600);
+	//start the library, pass in the name of the serial port. Can be Serial,
+	//Serial1, Serial2, etc.
+	ET.begin(&Serial);
+	
+	pinMode(13, OUTPUT);
+	
+	randomSeed(analogRead(0));
+
+}
+
+void loop() {
+	//this is how you access the variables. [name of the group].[variable name]
+	mydata.blinks = random(5);
+	mydata.pause = random(5);
+	//send the data
+	ET.writeInt(mydata.blinks);
+	ET.writeInt(mydata.pause);
+	ET.sendData();
+	
+	//Just for fun, we will blink it out too
+	for (int i = mydata.blinks; i > 0; i--) {
+		digitalWrite(13, HIGH);
+		delay(mydata.pause * 100);
+		digitalWrite(13, LOW);
+		delay(mydata.pause * 100);
+	}
+
+	delay(5000);
+}