Let astyle do magic

Author: showengineer

libraries/SrcWrapper/src/stm32/interrupt.cpp

@@ -45,7 +45,7 @@
 /*As we can have only one interrupt/pin id, don't need to get the port info*/
 typedef struct {
   IRQn_Type irqnb;
-  std::function<void(void)> callback;
+  std::function < void(void) > callback;
 } gpio_irq_conf_str;
 
 /* Private_Defines */
@@ -210,7 +210,7 @@ void stm32_interrupt_enable(GPIO_TypeDef *port, uint16_t pin, callback_function_
   */
 void stm32_interrupt_enable(GPIO_TypeDef *port, uint16_t pin, void (*callback)(void), uint32_t mode)
 {
-  std::function<void(void)> _c = callback;
+  std::function < void(void) > _c = callback;
   stm32_interrupt_enable(port, pin, _c, mode);
 
 }

libraries/VirtIO/src/rsc_table.c

@@ -47,8 +47,8 @@ const struct shared_resource_table __attribute__((__section__(".resource_table")
   .reserved = {0, 0},
   .offset = {
     offsetof(struct shared_resource_table, vdev),
-    offsetof(struct shared_resource_table, cm_trace),
-  },
+      offsetof(struct shared_resource_table, cm_trace),
+      },
   /* Virtio device entry */
   .vdev = {
     .type = RSC_VDEV,

variants/STM32C0xx/C092CBT_C092RBT_C092RC(I-T)/variant_NUCLEO_C092RC.cpp

@@ -119,22 +119,20 @@ void SystemClock_Config(void)
   */
   RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
   RCC_OscInitStruct.HSEState = RCC_HSE_ON;
-  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
-  {
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
     Error_Handler();
   }
 
   /** Initializes the CPU, AHB and APB buses clocks
   */
-  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
-                              |RCC_CLOCKTYPE_PCLK1;
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
+                                | RCC_CLOCKTYPE_PCLK1;
   RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSE;
   RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
   RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV1;
   RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV1;
 
-  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
-  {
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) {
     Error_Handler();
   }
 }

variants/STM32C0xx/C092CBT_C092RBT_C092RC(I-T)/variant_NUCLEO_C092RC.h

@@ -69,11 +69,11 @@
 #define PC1                     46
 #define PA3                     47      // RX
 #define PD6                     48
-#define PA12                    49      
-#define PA11                    50      
+#define PA12                    49
+#define PA11                    50
 #define PB12                    PIN_A12
 #define PA2                     52      // TX
-#define PC0                     53      
+#define PC0                     53
 #define PB1                     PIN_A13
 #define PB15                    55
 #define PB14                    56